Bioland Easy G-423ES Blood Glucose Test Strips – 50 Strips

Features:

• The glucose test strip is intended to measure the glucose levels in capillary whole blood from fingertips, palms, and forearms for self-testing with the meter.
• Test strips 50pcs for G-423ES Only, affordable glucose test strips for daily use.
• No coding is required, just insert the strip into the meter to turn it on, codefree test strips calibrate themselves to make testing easier than ever.
• A small sample size of 0.7µL for gentle testing – results are available after 5 seconds on the monitor.

Benefits:

• Accurate Glucose Measurement
• Efficient Sample Addition
• Fast and Easy Testing
• Reliable Chemical Composition

Quick Tips:

• Verify the glucometer product name before buying test strips.
• For in-vitro diagnostic use only.
• The test strip is for single use only.
• Refer to the manual for detailed instructions before using the product.
• Do not make any medical decisions without consulting a doctor. Always discuss your results with a registered medical practitioner.

Step-by-Step Guide for Using Blood Glucose Test Strips

• Begin by washing your hands thoroughly with soap and water. Pat dry them with a towel. Alternatively, you can use an alcohol swab to clean your finger, ensuring the fingertip is completely dry before testing.
• Remove a test strip from the box and insert it into the glucometer’s slot just before pricking your finger.
• Use a clean lancet device or insert a new needle into the lancet device.
• Prick the side of your fingertip using the lancet. Wait until a drop of blood appears. Wipe off the first drop gently and then place a drop or two of blood onto the designated area on the test strip attached to the glucometer.
• Hold a clean cotton pad or gauze on the prick site to stop the blood flow. Apply pressure until the bleeding stops.
• Your blood glucose level will appear on the meter’s display. Note down your readings to monitor your glucose levels over time.
• Repeat this procedure each time you test your blood glucose level.

Safety Information:

• Carefully read the manual/instruction leaflet before use.
• Each strip is for single use only. Dispose of used strips properly.
• Do not use it if the expiry date has passed.

Storage:

Store in a capped vial in a cool and dry space between 4-30°C.